This device can operate efficiently and smoothly according to different specifications of glass and production conditions. The lower part of the upper roller path is equipped with a water-saving plate, and the upper part is equipped with a cleaning pipeline. It not only preliminarily cleans the glass, but also cleans the impurities on the surface of the upper roller path, greatly reducing glass scratches. The upper brush is divided into soft and hard types, which can be selected and completed separately.

Main technical parameters:

◇ 3-level drum brush, cold water cleaning;

Adopting a dual blade hot air drying system; Combination of independent fan, circulating water, and hot air functions.

The brush is transmitted through gears and racks; Ensure the stability of device usage.

The glass conveying is achieved by a variable frequency speed regulating motor, chain, sprocket, and dense all rubber transmission rollers;

Three sets of brushes, using washable coating and LOW-E glass. It can be adjusted up and down freely, making it easy to clean the water tank and adjust the position of the brush.

The machine is divided into three stainless steel water tanks and three sets of sprinklers. The first group is for rough cleaning of glass, which washes away the glass dust on the polished edges of the glass.

The second group is a brush spray, with three pairs of brushes that can easily rinse the glass thoroughly.

The third group is the water roller spray, which washes away the residual dirt on the water roller. Transfer to the heating air knife to ensure cleaning effectiveness.

The fan system adopts an upward mounted design and is equipped with stainless steel dual group air knives to ensure long-term use without rusting and improve cleaning efficiency.

The whole machine protective plate is treated with spray coating, which has a beautiful appearance and is not easy to rust.

The fan adopts 15kW to ensure cleaning effect.

Technical parameters:

Power supply: 380V 50Hz

◇ Total power: 20.39kW

◇ Dimensions: 6000mm × 3200mm × 2800mm

◇ Fastest processing speed: 12 m/min

◇ Cleaning glass widest: 2500mm

◇ Minimum size for cleaning glass: 420 × 500 mm

◇ Glass processing thickness range: 3-24 mm